4
Share:
Main Features
Dinosorb is a calcium-based container desiccant designed to protect your cargo from moisture damage during shipments. Intended for long-haul shipments or rough weather.
| Active Desiccant Ingredient | Calcium Chloride |
|---|---|
| Appearance | Blue Strip with Blue Hook |
| Types Available | 1 kg/strip |
| Packing | 13pcs/ctn |
| Adsorption Rate | >200% |
| Packaging Material | Tyvek & HDPE |
Product Specifications
Dinosorb Specs
| Item | Standard Specification |
|---|---|
| Active Desiccant Ingredient | Active Calcium Chloride Power Gel |
| Weight (Active Gel) | 1000 grams |
| Weight (Gross) | 1085 grams |
| Static Water Adsorption | ≥200% |
| Packaged Water Content | ≤2.0 mg/g |
| Pressure Retention at Saturation Point | 94% at 3.9g/cm² - 89% at 7.7g/cm² |
| Operational Temperature | 25°C - 90°C |
Additional Information
Fonicpac's Dinosorb is a calcium-based desiccant - a type of natural desiccant that is designed to adsorb moisture aggressively to combat harsh and high moisture levels.
Specifically designed with preventing container rain in mind, Dinosorb comes with a hook that allows you to hang it up in the containers. This allows it to maximise its adsorption surface area for maximum adsorption capacity.
Fonicpac's Dinosorb mainly comes in 1kg/strip, 13pcs/ctn. Should you have a need for such modifications, please reach out to Dan (0168181089) to discuss the details. However, it is to note that as these modifications are not within our typically produced stocks, and thus may require a lead time of up to 2 weeks.
Fonicpac's Dinosorb is intended for single use. To minimise the environmental impact, we recommend the following procedure for disposal of the used desiccant. Dispose of according to national and local regulations. The material as supplied is not classified as hazardous, dangerous or toxic. Approved landfill sites can be used. Note that used material which is contaminated with process materials may have different hazards/properties from the material as supplied. Dispose of used material in accordance with the nature of the contamination.
Product Packaging Details
| Type | 1kg/strip |
|---|---|
| Appearance | Long blue strip with a dark blue clip on top |
| Strip Dimensions | 140 x 700mm |
| Box Dimensions | 49.5cm x 35cm x 18cm |
| Packing List | 13pcs/ctn |
| Gross Weight | 13.5kgs |
| Net Weight | 14kgs |
| Pallet Amount | 50 ctns (650pcs) |
| MOQ | 1 ctn |
| Shelf Life | 6 months after the manufacturing date. Please follow storage instructions to ensure the products can be preserved for further use. |
Installation, Usage & Storage
Usage
Dinosorb starts working as soon as it is removed from a box master PE bag. It is strongly advised that you do not take it out of the bag unless you need to use it. Designed with a hook, it is best used in:
- Cargo Containers (Shipping & Storage)
- Warehouses
Dinosorb is effective in controlling moisture inside a shipping container where fluctuating temperatures and moisture levels are present. This protects your cargo and sensitive goods from moisture damage such as container rain, structural deterioration, mold and mildew.
When to Replace
Dinosorb is single-use and cannot be regenerated. After it has reached its saturation point of moisture adsorption, simply discard it or recycle it. You can determine its saturation point in one of two ways:
- Dinosorb has over 200% moisture adsorption capacity. Simply weigh the fresh Dinosorb before usage, then add 200% of the weight to the measurement. The summed weight would represent the Dinosorb's mass when it has reached its saturation point.
- Dinosorb has turned from white flaky powder into a gelatinous gel completely.
Installation
Dinosorb comes with a hook that allows for easy installation. Simply break off the hook at the bottom of the plastic clip, and clip it together to allow the Dinosorb to be hooked on an edged surface.
It is highly recommended that Dinosorb be hung in a relatively high place, in an airtight environment.
Storage
After taking out the desired amount of Dinosorb, simply squeeze out the air from the master PE bag and tie it up. Taping the box after use is recommended. Keep in a cool and dry area away from sunlight.
Shelf Life
.png)
Integrated hook design for hanging Dinosorb inside cargo containers and suitable enclosed spaces.
Specifications